35(W)x7 Compacted Strand Wire Rope: Port kɔrɔtacogo jiginni

35(W)x7 juru min bɛ kɛ ni nɛgɛ yedabɔra kɔrɔtacogo gɛlɛnw kama yɔrɔ minnu na kari fanga ka bon, jiginni kunbɛnni, sɔgɔli kɛlɛli ani dunun sɔgɔli sabatili nafa ka bon. Ni i y’a suma ni juru juru sirilen kɔrɔlen ye, nɛgɛ juru jɔli bɛ baara kɛ ni ɲɔgɔndan kɛcogo wɛrɛ ye walasa ka juru kelen-kelen bɛɛ cɛmancɛ dɔgɔya ani ka dɔ fara juru dafalen nɛgɛ fa kan.

O faralen ɲɔgɔn kan, o b’a to 35(W)x7 juruw bɛnnen don kɛrɛnkɛrɛnnenya lakurunbonkarilaw, kurun-ka taa-kɔgɔjida la kurunw, kɔgɔjida la fɛnw kɔrɔtaminɛnw, girinw-baarakɛminɛn gɛlɛnw ani fɛnw kɔrɔtacogo wɛrɛw minnu bɛ se ka baara kɛ kosɛbɛ.

1. Mun na "Compacted"?

Solite Technology: High-density compacted strand surface ka ɲɛsin kɔrɔta baara gɛlɛnw ma.

Jiri juru min bɛ kɛ ni jiri ye min bɛ kɛ cogo la min bɛ kɛ tuma bɛɛ, nɛgɛ kelen-kelen bɛɛ kɔnɔ nɛgɛw labɛncogo dabɔlen don dɔɔnin. Kɔrɔsili waati, jiribolo bɛ dilan ni masin ye walasa nɛgɛw ka gɛrɛ ɲɔgɔn na ani jiribolo bɛɛ lajɛlen cogoya ka kɛ ɲɔgɔndan ye.

O kɔlɔlɔ ye juru ye min bɛ anɛgɛ fasa hakɛ min ka bon ani kɛnɛma yɔrɔ min bɛ kɛ kelen ye. Ka kɛɲɛ ni juru jɔcogo n’a dilanni taabolo ye, o bɛ se ka nafa sɔrɔ kari fanga la, a sanfɛla magali la, a ka sɔgɔsɔgɔli la ani a ka se ka sɔgɔsɔgɔ.

2. Strand Compaction bɛ baara kɛ cogo di?

O ɲɔgɔndan kɛcogo bɛ Kɛ juru dilanni waati. O jirisun kelen-kelen bɛɛ bɛ digidigi ani ka u cogoya kura sɔrɔ sani dadon laban ka kɛ walima a kɛtuma na.

Fɛn dilanni siratigɛ nɔgɔman ye:

1. Nɛgɛberew bɛ dilan ka kɛɲɛ ni u cɛmancɛ ni u sɔgɔli fanga kofɔlen ye.
2. Filɛri kelen-kelen bɛɛ bɛ lajɛ ka kɛ helikili ye ka kɛ jirisunw ye.
3. O jirisunw bɛ Kɛ ni ɲɔgɔndan kɛcogo dɔ ye min bɛ Kɔlɔsi.
4. O jiribolo minnu bɛ ɲɔgɔn Dòn, olu bɛ Da jurumugu lamini na.
5. Jiri dafalen bɛ sɛgɛsɛgɛ a cɛmancɛ, a jɔcogo, a dacogo, a fanga ani a sanfɛla cogoya.

A dilanni taabolo tigitigi bɛ danfara ka kɛɲɛ ni juru dilanni, minɛnw ani dilanbaga ka fɛɛrɛ ye. Walasa ka baara kɛ kosɛbɛ -crane juru la, dimensional consistency ani controlled strand geometry nafa ka bon bawo u bɛ nɔ bila juru ni sheaves ni drums bɛ ɲɔgɔn sɔrɔ cogo min na.

3. Mun de bɛ 35(W)x7 kɛ danfara ye?

A tɔgɔladonni35(W)x7bɛ juru caman-sira jɔli ɲɛfɔ min bɛ kɛ ni jiribolo wolonwula ye cɛmancɛ-kɔnɔna dɔ lamini na, ni Warriington-suguya jirisunw labɛncogo ye min bɛ jira tuma caman na ni "W" tɔgɔ ye.

Kɛnɛma nɛgɛw ni nɛgɛw hakɛ caya bɛ nɛgɛ tigɛyɔrɔba di min ka bon kosɛbɛ k’a sɔrɔ a bɛ jogo minnu mara girinmanw kɔrɔtacogo la.

4. Nɛgɛ yɔrɔ min ka bon, Kari fanga seko ka bon

Nafa belebele minnu bɛ sɔrɔ ɛntɛrinɛti kan, n’olu ye nɛgɛw jɔli ye ni nɛgɛ ye, o ye nɛgɛ falenni caya ye juru cɛmancɛ dilen dɔ kɔnɔ.

Nɛgɛ caman sɔrɔli juru tɔgɔlama kelen kɔnɔ, o bɛ se ka dɔ fara juru ka nɛgɛ tigɛyɔrɔ-yɔrɔ sɔrɔlen kan. Ni o farala ɲɔgɔn kan ni nɛgɛ sɔgɔli fanga bɛnnen ye ani juru jɔcogo ɲuman, o bɛ se ka kɛ sababu ye ka akari fanga dɔgɔyalenba min ka bonka tɛmɛ juru kɔrɔlen kan min bɛ se ka suma ni ɲɔgɔn ye, n’a cɛmancɛ tɔgɔ ye kelen ye.

O bɛ se ka nafa sɔrɔ kɛrɛnkɛrɛnnenya la ni minɛn dilannikɛlaw mago bɛ ka kari fanga wajibiyalen sɔrɔ k’a sɔrɔ u ma dɔ fara juru cɛmancɛ kan kosɛbɛ.

5. Mun na 35(W)x7 bɛnnen don Port Cranes ma?

Port cranes bɛ baara kɛ cogoya gɛlɛnw na, doni girinmanw, wulicogo segin-segin, dunun spooling multi-layer, doni fangama ani k’u bila kɔgɔjida laminiw na.

O cogoyaw bɛ ɲininibaw kɛ nɛgɛ juru kan.

Jiri min bɛ 35(W)x7 sɔgɔlen ɲɛfɔ ka ɲɛ, o bɛ se ka ninnu faralen ɲɔgɔn kan:

• Kari fanga ka bon:A bɛnnen don -seko caman kɔrɔtacogo ma.
• Yɛlɛma-yɛlɛma kunbɛncogo:Multi-layer jɔli bɛ dɛmɛ ka juru jiginni kɔlɔsi doni kɔrɔ.
• Falen nɛgɛma sanfɛ:Nɛgɛ yɔrɔ caman bɛ juru cɛmancɛ kɔnɔ.
• Surface compactée (yɔrɔ min bɛ sɔgɔsɔgɔ):A bɛ kɛnɛma-yɔrɔ dɔ di min ka nɔgɔn.
• Muguci kunbɛncogo:A bɛ dɛmɛ ka degun muɲu min bɛ tali kɛ multi-layer spooling la ni a ni minɛnw bɛnna ka ɲɛ.
• Sɛgɛn kɛcogo:So jɔcogo bɛnnen bɛ se ka dɛmɛ don ka segin-ka-bɔnye kɛ ni a ni bɔgɔdaga ɲumanw ni baarakɛcogo bɛnnenw bɛnna.

6. Multi-Layer Drum baarakɛcogo

Jateminɛ nafama minnu ka kan ka kɛ port crane juruw la, olu dɔ ye juru bɛ ​​taama cogo min na ni a bɛ sɔgɔsɔgɔ dunun caman-layer kan.

Multi-layer winding waati la, juru bɛ ​​se ka kɛ ni degun radial ye, ka doni tigɛ ani ka localized contact kɛ juru layers kɛrɛfɛ. Jiri sugandili jugu walima dunun labɛncogo jugu bɛ se ka teliya, ka a sɔgɔ, ka a sɔgɔ ani ka a sɔgɔli teliya.

Jiri 35(W)x7 kɛnɛma yɔrɔ min sirilen don ɲɔgɔn na, o bɛ se ka kɛ sababu ye ka ɲɔgɔn sɔrɔ cogo basigilen na juruw jiginni kɛrɛfɛ. O bɛ se ka dɛmɛ ka ɲɔgɔnkanu fanga tila-tila cogo kelen na baarakɛcogo bɛnnenw na.

Nka, juruw jɔli dɔrɔn tɛ se ka spooling gɛlɛyaw ban. Nin minɛnw paramɛtiriw fana ka kan ka bɛn ɲɔgɔn ma ka ɲɛ:

• Dɔrɔmɛ cɛmancɛ
• Drum groove jateminɛcogo
• Fleet angle (Angle) min bɛ kɛ
• Jiri layiniw hakɛ
• Jiriw cɛmancɛ janya
• Drum winding sira
• Jiri bila sira kan
• Baara doni ni kɔrɔta teliya

7. Strand compacted vs Strand kɔrɔlen

8. 35(W)x7 ka ɲɛsin Kɔgɔjida ni kurunbonkarila laminiw ma

Port ni kɔgɔjida la baarakɛcogo bɛ gɛlɛya wɛrɛ lase mɔgɔw ma: sɔgɔsɔgɔninjɛ. O la, juru kɔrɔtalen min bɛ baara kɛ kosɛbɛ, o ka kan ka sugandi ka da masin baarakɛcogo dɔrɔn kan, nka ka da sigida laminiko fana kan.

Ni kurunbonkarila minɛnw bɛ baara kɛ kɔgɔjida la walima kɔgɔ-yɔrɔw la, dugukolo sanfɛla lakanani ni u ladonni bɛnnen nafa ka bon. Ka kɛɲɛ ni ɲinini sɛbɛn ye, .galvanisé nɛgɛ juru jurubɛ se ka fiɲɛ sɔgɔli kunbɛncogo ɲɛ ni i y’a suma ni nɛgɛ juru ye min bɛ yeelen bɔ/min ma datugu.

Ni kɔgɔjida la bana jugumanba don, juru sugandili ka kan ka jateminɛ kɛ:

• Galvanizing quality ani coating cogoya
• Tumu kɛcogo
• Kɔgɔ fiyɛli ni nɛnɛ kɛli
• Jibɔ ni ji dalajɛli
• Sɛgɛsɛgɛli kɛcogo caman
• Jiriw marali ani u minɛcogo
• Baarakɛcogo sɛrɛkili minnu bɛ makɔnɔ

Nɔgɔli lakanani tɛ sɛgɛsɛgɛli kɛ tuma bɛɛ nɔ na. Jiri min bɛ baara kɛ kɔgɔjida la, o ka kan ka kɔlɔsi ni a tɛ sɔgɔ, ni a ka filiw karilen don, ni a cɛmancɛ dɔgɔyara, ni a tɛ sɛgɛn ani ni a bɛ sɔgɔsɔgɔ a baarakɛ waati bɛɛ kɔnɔ.

9. 35(W)x7 ni 35x7: Danfara ye mun ye?

Sannikɛlaw bɛ baara kɛ ni o ye tuma dɔw la35x7ani35(W)x7ɲɔgɔn falen-falen, nka sɛrɛkili jɔcogo tigitigi ka kan ka dafa tuma bɛɛ ka bɔ a dilabaga ka fɛɛrɛ ja ni a ka kunnafonidilan na.

"W" tɔgɔdacogo bɛ Warrington-suguya nɛgɛ labɛncogo jira caman na jiribolo kɔnɔ. Jagokɛcogo ɲɛfɔli bɛ se ka nɔ bila juru in nɛgɛyɔrɔ la, a bɛ se ka wuli ka bɔ a nɔ na, ​​a kari fanga la, a jiginni kunbɛncogo la ani a sɛgɛncogo la.

O la, ni sannikɛlaw bɛ quotation ɲini, u ka kan ka juru tɔgɔ dafalen di sanni u k’u jigi da kumasen caman dɔrɔn kan i n’a fɔ « 35x7 crane rope ».

10. Paramɛtiri jɔnjɔn minnu ka kan ka ɲɛfɔ ni i bɛ komandi kɛ 35(W)x7

Walasa ka kuma fɔcogo ɲuman sɔrɔ ani fɛɛrɛko ladilikanw, aw bɛ nin kunnafoni ninnu caman di:

• Diamɛtiri tɔgɔlama: .Misali la milimɛtɛrɛ 20, milimɛtɛrɛ 24, milimɛtɛrɛ 28, milimɛtɛrɛ 32, milimɛtɛrɛ 36 walima a bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye.
• Jiriw jɔli:35(W)x7 walima a ɲɔgɔnna jɔli kofɔlen.
• Kìsɛ:Aw bɛ core configuration wajibiyalenw dafa.
• Kɛnɛ:Galvanized walima bright/uncoated ka kɛɲɛ ni a kɛcogo ye.
• Tensile fanga: 1 .Aw bɛ nɛgɛw sɔgɔli fanga hakɛ wajibiyalen fɔ.
• Ka da:Nimanbolo-bolo walima numanbolo-bolo bɛ da i n’a fɔ minɛnw dilanni b’a ɲini cogo min na.
• Jiri janya: 1 .Aw bɛ janya wajibiyalen bɛɛ lajɛlen walima bobine janya fɔ.
• Fanga min bɛ kari:Aw bɛ kari fanga hakɛ fitinin wajibiyalen di yɔrɔ minnu na.
• Waleyali:Port crane, kurun-ka-kɔgɔjida crane, kɔgɔjida la crane, hoist walima fɛn wɛrɛw kɔrɔta.
• Dunun labɛncogo:Layɛrɛ kelen-layer caman-layer winding.

11. 35(W)x7 juru sɛgɛsɛgɛli ni a ladonni

Hali juru min bɛ kɛ ni nɛgɛ ye min bɛ baara kɛ kosɛbɛ, o bɛ ladonni ɲuman de wajibiya. Sɛgɛsɛgɛli ka kan ka sinsin yɔrɔw kan, kurukuruni, degun ani sɛgɛn bɛ yɔrɔ minnu na.

1. Aw bɛ a lajɛ ni filiw karilen bɛ ye.
2. Aw bɛ juru cɛmancɛ suman ani ka a suma ni sɛbɛn tɛmɛnenw ye.
3. Aw bɛ a lajɛ ni kɛnɛma sɛgɛn ni sɔgɔsɔgɔninjɛ tɛ.
4. Aw bɛ a lajɛ ni nɛgɛ yɔrɔ dɔ tiɲɛna ani ni a bɔnɛna a la.
5. Aw bɛ a lajɛ ni kinkisɛw, flakɛli ani sɛrɛkiliw bɔgɔlan tɛ.
6. Aw bɛ dunun ni sheave cogoya lajɛ.
7. Aw bɛ tulu kɛcogo ɲuman sɛgɛsɛgɛ.
8. Aw ye aw janto kɛrɛnkɛrɛnnenya la crossover zones kan multi-layer drums kan.
9. Sɛgɛsɛgɛli jaabiw sɛbɛn ani ka tiɲɛni kɛcogo kɔlɔsi.

Ni kran baara bɛ kɛ, sɛgɛsɛgɛli ni filiko latigɛw ka kan ka tugu minɛnw wajibiyalenw kɔ, u dilannikɛlaw ka laadilikanw ani sariyaw minnu bɛ tali kɛ o la i n’a fɔISO 4309 ye.

12. Ɲininkali minnu bɛ kɛ tuma caman na

35(W)x7 nɛgɛ juru bɛ ​​kɛ mun na?

35(W)x7 nɛgɛ juru bɛ ​​kɛ ka caya -baara gɛlɛnw kɔrɔtacogo la yɔrɔ minnu na kari fanga ka bon ani ka wuli ka se ka wuli. Baarakɛcogo minnu bɛ kɛ tuma caman na, olu ye kurunbonkarilaw ye, kurun-ka taa-kɔgɔjida kurunw, kɔgɔjida la fɛnw kɔrɔtaminɛnw ani izini kurunbaw.

W kɔrɔ ye mun ye 35(W)x7 kɔnɔ?

"W" bɛ tali kɛ caman na Warrington-suguya nɛgɛ labɛnni na jurumugu kɔnɔ. A jɔli tigitigi ka kan ka dafa ka kɛɲɛ ni a dilabaga ka fɛɛrɛbɔcogo ye bawo juru tɔgɔw bɛ se ka ɲɔgɔn ta ka kɛɲɛ ni dilanbaga ni sariya ye.

Jiri juru min bɛ kɛ ni jiribolo ye min bɛ sɔgɔsɔgɔ, o ye mun ye?

Jiri juru min bɛ sɔgɔsɔgɔ, o bɛ dilan ni nɛgɛ kelen-kelen bɛɛ sirili ye ni masin ye, ka nɛgɛw gɛrɛ ɲɔgɔn na ani ka nɛgɛw cogoya dɔ dilan min ka bon. O bɛ se ka dɔ fara nɛgɛ facogo kan ani ka juru sanfɛla nɔgɔya.

Yala juru min bɛ kɛ ni nɛgɛ ye, o barika ka bon wa?

Jagokɛcogo min bɛ kɛ ni ɲɔgɔn ye, o bɛ se ka nɛgɛ facogo caman di, o la, kari fanga seko ka bon kosɛbɛ cɛmancɛ tɔgɔlama dɔ la. Nka, kari fanga lakika bɛ bɔ juru jɔli la, nɛgɛw sɔgɔli fanga, a kɔnɔna, a cɛmancɛ ani a dilanni cogoya.

Mun na juruw bɛ kɛ kurunbonkarilaw kan?

Tuma caman na, kurunbonkarilaw bɛ juru kɔrɔtalenw de wajibiya minnu fanga ka bon, minnu bɛ se ka segin-ka-bɔnye muɲu ani ka dunun sɔgɔli caman{1}}layer spooling muɲu. Fɛnɲɛnɛma jɔli min bɛ kɛ ni nɛgɛ ye, o bɛ se ka kɛ sababu ye ka nɛgɛ fa caman di, ka kɛnɛma ɲɛda nɔgɔya ani ka a kɛlɛ ka ɲɛ ka ɲɛsin a sɔgɔli ma baara bɛnnenw na.

Yala 35(W)x7 ye nɛgɛ juru ye min tɛ-yɛrɛyɛrɛ wa?

35(W)x7 bɛ kɛ ka caya i n’a fɔ jiginni-min bɛ se ka wuli walima ka jiginni dɔgɔya-kran juru jɔli la, nka jiginni kɛcogo tigitigi bɛ bɔ juru dilanni dafalen na, a layidu la, a kɔnɔna na ani a dilabaga ka ɲɛfɔli la. Aplikasi danfara wajibiyalen ka kan ka dafa tuma bɛɛ ka bɔ fɛɛrɛko kunnafonidilan na.

Danfara jumɛn bɛ nɛgɛ juru min bɛ sɔgɔsɔgɔ ani min ma -sɔgɔ?

Jiribolo minnu bɛ ɲɔgɔn Dòn, olu bɛ Kɛ ni dilancogo wɛrɛ ye min bɛ dɔ Fàra juruw caya kan ani ka yɔrɔ dɔ Dabɔ min ka nɔgɔn. Fɛnɲɛnɛma minnu tɛ{1}}sɔrɔ, olu bɛ jateminɛ kɛcogo kɔrɔlen dɔ mara. Kɔrɔbɔli bɛ se ka nɛgɛ facogo, a sanfɛla magali ani a sɔgɔli kunbɛncogo ɲɛ ka kɛɲɛ ni juru dilanni ye.

Ne bɛ se ka 35(W)x7 nɛgɛ juru ɲuman sugandi cogo di?

Sugandili ka kan ka juru cɛmancɛ, a jɔcogo, a kɔnɔna, a sɔgɔli fanga, a kari fanga, a dacogo, a dunun cɛmancɛ, a sɔgɔlen cɛmancɛ, dunun layini hakɛ, a kɔrɔta doni, a baarakɛcogo ani sigida cogoyaw jateminɛ.

13. Mun na an bɛ SOLITE 35(W)x7 Compacted Wire Rope sugandi?

Walasa ka crane baara gɛlɛnw kɛ, nɛgɛ juru baarakɛcogo bɛ bɔ juru dilanni n’a dilanni ɲɔgɔndan fila bɛɛ la. SOLITE b’a sinsin nɛgɛ juruw dilanni kan min bɛ kɔlɔsi iziniw kɔnɔ, ni fɛɛrɛbɔ dɛmɛ ye juruw dilanni na, u cɛmancɛ, u sanfɛla furakɛli, u pakew dilanni ani u kɛcogo wajibiyalenw.

• 35(W)x7 compacted strand wire juru suganditaw
• Galvanized ani uncoated surface sugandiliw
• Diamètre caman ani juru janya
• Bobine ni pakew ɲɛnabɔcogo minnu bɛ kɛ ka kɛɲɛ ni mɔgɔw sago ye
• Tekniki kunnafonidilanw dɛmɛni
• Aplikasi-based juru sugandili
• OEM ani customized wire juru dilancogo